![]() Gypsum plasters do not shrink (unlike cement) during the drying out and hardening process.It retains its composition for thousands of years as testified by the construction of the Cheops Pyramids Gypsum plaster contains no dangerous chlorides.Free from inherent shrinkage cracking, low density, no curing, and no fungus provide a smooth surface, holds nails & other fittings, all normal decoration etc.It can be directly applied to the above mention Area of Applications, so there is no need of cement plaster & POP/Neeru Finished etc.UniversalUniversal FineUniversal Super Fine-Colours of Finished SurfaceOff WhiteWhiteSuper WhiteBulk Density kg/m☱25011201050Setting Time/minutes20-2525-30:30-35Coverage of 25 kg Bag at 13 mm (Thickness)16-17 sq.ft18-19 sq.ft:20-21 sq.ftCompressive Strength kg/cm☦5-7570-8070-80 ![]() To ensure that hands are dry before always fold open end of the bag, to protect plaster from moisture.īags should be handled carefully to avoid tearing. Tools & Water used should be clean & free of impurities. Once plaster wet mix is made & has started to do a set, it should not be tempered with fresh mix or powder, as it will affect the properties.ĭue care should be taken to ensure that rapid loss of water is avoided, in not & dry condition. The material should be thoroughly mixed & stirred as to ensure it is free from lumps and impurities before use. The height suction background should be adjusted by sprinkling water.Īlways mix powder, not water to powder. The surface should be reasonably dry & protected from weather conditions. (for fittings or conduits ) should be filled firmly before starting plastering.Įntire background (to be plastered) should be thoroughly brushed & cleaned to remove dust, loose mortar & oil/grease. It is advisable to do a mock-up of an entire flat in your building to ascertain the actual consumption pattern of Gypsum Plaster.įittings & plugging should be done before plastering. Bricks/Blocks.īased on field trials & experience, the consumption pattern of Gypsum Plaster varies between 1.5 kg. It also depends upon the basic wall base material i.e. The consumption of Gypsum Plaster is directly related to the line & level of the walls in the building, which is a variable factor. Light Weight – Better strength to weight ratio as compared to density.Īchieves total strength within 48 hours on complete drying (Quick drying) Low (Thermal Resistance R = 0.07 m2 k/w,13mm thickness)Įasy Workability: Easy to mix - Easy to Apply.Ĭlassified as noncombustible (BS:476 part 4:1970)
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |